Atrea Duplex Easy 250 filter set 10 pcs. G4 (original)
Atrea Duplex Easy 250 filter set 10 pcs. G4 (original)
Filter protection level indicates efficiency in blocking particles or contaminants, varying by standard and application.
General dust and particle filtration
Filter protection level indicates efficiency in blocking particles or contaminants, varying by standard and application.
Certified quality to international ISO standards
Manufactured entirely within the European Union
Effective filtration for up to 6 months.
Model compatibility
Compatible with the following models:
- Atrea Duplex Easy 250
What filter set protects against
Filter pack includes 10 filters that can be used as:
- Extract filter – G4 (Coarse 75%) – for MVHR protection
- Supply filter – G4 (Coarse 75%) – for indoor air protection
This filter pack follows the ISO 16890 standard for particle filtration efficiency.
The G4 filters capture up to 75% of coarse airborne particles that are larger than 10 microns, such as soil particles, large pollen grains, plant debris, insect wings, sawdust, sand and textile lint. The filter used on the extract side cleans the air removed from your indoor space and protects the MVHR unit by reducing visible dust and general build-up in the ventilation system. Meanwhile, the filter used on the supply side helps clean incoming outdoor air before it enters your premises, improving indoor air quality and protecting your health.
While the pack contains 10 filters, only 2 are used at a time – one for the extract side and one for the supply side of your MVHR system. You can use the same filter type for both. However, if you prefer a higher filter class for the supply side, we recommend purchasing an additional 10-pack of F7 filters, as they are sold separately. You can find them via this link.
Usage and maintenance
Atrea recommends replacing the filters every 3 months, to ensure optimal air quality and system performance.
However, replacement frequency may vary depending on factors such as:
- Air pollution levels (e.g. urban vs rural areas)
- Allergies or respiratory sensitivities
- Indoor pets or smoking
- Dust from nearby construction sites
If your system includes a filter change indicator, follow its alerts. Otherwise, check the filters visually – if they appear very dirty or clogged, it's time to replace them.
Manufacturing quality
These filters are manufactured by Atrea, a respected family‑owned company based in the Czech Republic. Alongside its main facility, Atrea coordinates production through branches and authorised partners across Europe, where they maintain strict oversight of product quality. Backed by over 30 years of engineering experience, Atrea designs its products with a focus on energy efficiency, incorporating advanced heat exchange systems, automatic climate control, and cutting-edge airflow technology. All products undergo thorough internal testing and meet stringent European performance and quality standards.
These material filters are made from high-quality synthetic non-woven media, designed to provide reliable particle filtration with minimal airflow resistance. This type of filter is lightweight, flexible, and easy to handle during replacement.
These material filters come in the form of a bag. They are designed to be mounted on the reusable wire frame already integrated into your MVHR unit. When replacing the filter, remove the wire and dispose of the used filter media, then reuse the wire frame with the new filter. This design ensures structural stability inside the unit while minimizing unnecessary waste.
Choosing original Atrea filters guarantees your MVHR system performs according to the manufacturer’s specifications, maintaining optimal air quality and energy efficiency.
Original product codes
- A161120
| Filter Type / EN 779 Class | ISO 16890 Class | Efficiency (%): Coarse (>10 µm) | PM10 (≤10 µm) | PM2.5 (≤2.5 µm) | PM1 (≤1 µm) | Gas/VOC Removal | Real-Life Particle & Pollutant Examples |
|---|---|---|---|---|---|---|---|
| G1 | ISO Coarse | ~40% | <10% | ~0% | ~0% | Sand, textile fibers, carpet fluff, plant debris, insect wings, visible lint | |
| G2 | ISO Coarse | ~50% | <15% | ~0% | ~0% | Sawdust, hair, coarse textile particles, large flakes of paint or rust | |
| G3 | ISO Coarse | ~60% | <25% | ~5% | ~0% | Coarse dust, lint, animal hair, some pollen | |
| G4 | ISO Coarse | 65-75% | 25-35% | 10-15% | <5% | Large pollen grains, soil particles, textile lint | |
| M5 | ISO ePM10 ≥50% | ~80% | 50–65% | 20–30% | 10–15% | Pollen, mold spores, pet dander, house dust | |
| M6 | ISO ePM10 (60–80%) | ~90% | 65–80% | 30–45% | 15–25% | Building/construction dust, concrete dust, ash particles, fine cement dust | |
| F7 | ISO ePM2.5 (50–65%) | >90% | 75–90% | 50–65% | 30–45% | Bacteria, smog, tobacco smoke particles, combustion dust, spores, wildfire smoke particles | |
| F8 | ISO ePM2.5 (65–80%) | >95% | 85–95% | 65–80% | 45–60% | Fungal spores, air pollution aerosols | |
| F9 | ISO ePM1 (80–95%) | >95% | >95% | >90% | 80-95% | Diesel soot, airborne viruses, smoke from traffic and industry, combustion particles, ultra-fine dust, secondary organic aerosols from chemical reactions in air | |
| Activated Carbon | Not classified (gas filter) | Varies (combined with prefilter) | Varies | Varies | Varies |
High Efficiency |
Volatile Organic Compounds (VOCs), formaldehyde, ozone, nitrogen dioxide (NO₂), sulfur dioxide (SO₂), benzene, toluene, cooking odors, cigarette smoke odors, pet smells, perfumes |
Instructions for changing the filters are provided in the manual below:
Filter Replacement Manual for Atrea Duplex Easy 300&400 and Duplex Easy 250
Frequently Asked Questions
Frequently asked questions ordered by popularity.
Filter class refers to the size and amount of particles a filter can trap. The higher the classification, the more effectively the filter removes particles from the air.
For incoming outdoor air, it’s generally recommended to use higher-class filters. However, we always suggest following the manufacturer’s guidance and using the specific filter sets outlined in your unit’s eco-commissioning documentation.
For more information, take a look at our comprehensive guide to filter classes for heat recovery units.
It is recommended to change the filters in your HRV every 3 to 6 months, depending on how dirty they become. However, the key signs that your filters need replacing include:
- An increase in noise from the HRV
- A reduction in the amount of air being supplied or extracted
Smart HRVs with an electronic control panel and display screen show the volume of air supplied and extracted per hour.
For example, if a Zehnder ComfoAir Q350 HRV in a 140m² home operates at an optimal rate of 190m³ per hour but drops to 150–170m³, the filters should be replaced.
- Check the label on the unit itself, which usually displays the manufacturer and model number.
- Contact your installer or the developer/builder of your property for details.
- Measure the width, length, and height of the filter, then use these measurements to browse our online shop. Our system will suggest the correct recuperator filters for your unit.
- If none of the above help, please get in touch via the chat box at the bottom right of the page, and we’ll be happy to assist you.
Still Have Questions?
Support details to capture customers that might be on the fence.
Contact Us Now
Average rating
0.0
Only logged in customers who have purchased this product may leave a review
Customer Feedback
There are no reviews yet.